Звуковые интерфейсы
USB Аудиоинтерфейсы
ART USB Mix 30 930 KZT

Минимикшер с USB интерфейсом,
1 микрофонный вход, 2 линейных входа, 2 линейных выхода, 1 выход на наушники, фантомное питание 48V.
Не требуется драйверов для Windows XP\7\8 (без поддержки ASIO). Идеально подходит для первичной записи с микрофона или с инструмента.
Удобно использовать при записи дикторских голосов и т.п.
Прекрасно дополнит мобильный компьютер стандартным набором входов и выходов.

Наличие: Нет в наличии ()

Код производителя: Не указан

Артикул: 20721

Описание (англ)

The ART USB Mix Three Channel Microphone, Instrument, and Line Mixer / Computer Interface is a compact versatile audio interface for your computer that converts analog signals from a variety of audio sources to USB Audio. The USB Mix provides a great starting point for personal home studio recording or for anyone wanting to do mobile location recording.


    USB powered, no external power supply needed when used with a computer
    Balanced XLR or unbalanced ¼-inch Instrument inputs with switchable impedance
    Switchable low noise +48V phantom power
    Balanced ¼-inch TRS inputs for stereo or mono line-level sources
    ¼-inch TRS output jacks work with balanced or unbalanced lines
    Stereo ¼-inch TRS headphone jack with independent level control for output monitoring
    Independent controls for both sets of inputs, main output, and headphone monitor
    Green/Red LED signal/clip indicator
    Switchable assignment of USB playback to channels 2 and 3
    USB 2.0 compliant
    USB cable, AC adapter, and Audacity recording software included


Frequency Response: 20 Hz - 20 kHz (+0, -1 dB)
Total Harmonic Distortion: <0.01% @ 1 kHz
Maximum Input Level: +4dBu (XLR input), +14dBu (1/4" input)
Maximum Output Level: +14dBu (Main Mix Outputs), +13dBu (Monitor output)
Input Connections:
    XLR balanced / 1/4" unbalanced "Combo" jack (ch1 input)
    1/4" balanced or unbalanced (Ch2-Ch3 inputs)
Output Connections:
    1/4" TRS balanced (Main Mix outputs)
    1/4" TRS stereo (Monitor output)
Input Impedance:
    240k Ohms (Inst-HiZ),
    20k Ohms (Line) (Ch 1, Ch2-Ch3 1/4" inputs)
    > 4k Ohms (Ch1 XLR input)
Output Impedance:
    <1k Ohms (balanced 1/4"),
    <500 Ohms (unbalanced 1/4")
    100 Ohms (Monitor output)
CMRR: > 54 dB typical
Phase Response: All connections are phase coherent
Signal to Noise Ratio: > 90 dB typical (Ref 0 dBu)
Equivalent Input Noise: -120 dBu typical (XLR balanced, max gain), -100 dBu typical (1/4")
Maximum Gain (In to Main Out):
    +53dB (XLR),
    +32dB (1/4") Ch1 input
    +10dB (1/4") (Ch2-Ch3 inputs)
Maximum Gain (In to USB):
     +44dB (XLR),
    +23dB (1/4") (Ch1 input)
    +1dB (1/4") (Ch2-Ch3 inputs)
Maximum Gain (USB to Out):
    +14dB (Main Mix outputs),
    +13dB (Monitor output)
Phantom Power: Switch selectable, +48V DC, filtered, current limited
A/D-D/A: 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer 0.4 ms A/D latency @ 44.1 kHz
Computer Interface: USB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SE\Mac OS 9.1 / OS X computers with native USB support, Linux
Chassis Type: All steel black finish
Power Requirements: 5.0V DC @ <500 mA (external) or USB bus powered @ 150 mA typical
Notes: 0 dBu = 0.775Vrms
Dimensions: 41 x 101 x 121 mm
Weight: 0.5 kg includes power supply and USB cable

Внешний вид

Верхняя панель

Задняя панель


РК, г. Алматы ул. Шевченко, 164 Г, оф. 2, тел: +7 (727) 269-96-11, +7 (727) 269-99-34, Факс: +7 (727) 269-91-89. Версия сайта для компьютера:

▲ Наверх